ZZ-002738 F3、F3-6型立卧等分分度头 TYPE F3、F3-6 SUPER SPACER

F、F3-6等分分度头是立卧式的,主轴可与机床工作台成水平与垂直两种情况下使用,可用于铣床,磨床,钻床及刨床上,将工件分成2,3,4,6,8,12,24等分,也可用蜗轮副传动进行任意分度.

Type F3、F3-6 super spacer is designed for using and indexing in both horizontal and vertical position. It is the most optimum in use for milling machines, grinding machines, drilling machines, planer and etc. The divisions in 2,3,4,5,8,12,24 are permitted by notched plate, and any desired angular methods can be switched over conveniently.

主要规格和参数:Main specifications

项目 Items 规格 Specifications F3 F3-6
中心高 Center height mm 150 130
主轴定位直径 Center diameter of the spindle mm Φ119.774 Φ80
主轴轴向直径 Diameter of the spindle shoulder mm Φ212 Φ170
可分等分数 Divisions 2,3,4,6,8,12,24
主轴的圆周刻度 Graduated disc of spindle 1.5 360° 125
蜗轮副数 Modules of worm and worm gear
蜗轮副传动比 Transmission ratio of worm and worm gear 1:90
蜗轮副传动比的齿合度 Showed degree of worktable per revolution of worm 4°
游标盘示值 Minimum value of vernier 10"
定位精度度 Width of locating key mm 16
可配卡盘 Matched chuck K31210A K31167
24等分单个分度误差 24 divisions individual error 25"
蜗轮副分度误差 Worm gear dividing error ±60"
净重 Net weight Kg (62)77 (40)50
毛重 Cross weight Kg (73)88 (50)60
包装尺寸 Case dimensions mm 490×425×380 470×350×360

*括号内为内销产品重量,括号外为出国带花盘产品重量

F3、F3-6型立卧等分分度头安装尺寸图 Dimensional sketch

注:配带附件Accessories
护板6件 Six mask plates
六方扳手3个 Three 6-square spanner wrenches
三爪卡盘 3-jaw chuck
花盘(特殊定货) face plate(Optional)

F3、F3-6型立卧等分分度头安装尺寸 Installation sketch and dimensions:

尺寸 F3 F3-6
A 310 250
B 255 220
C 200 188
D 78 78
E 16 16
F 18 18
G 230 198.75
H 150 130
I 75 66
J 126 112
K 90 80
L 155 150
M 244 220
N 285 235
O Φ210 Φ167

*资料仅供参考,具体购买前请确认参数细节.